Sunrise Marine Australia logo SUNRISE MARINEAUSTRALIA
Home › Products › Test, Measurement & Inspection Equipment › Emtek EMT-701 Digital Installation Tester (Multifunction: Insulation,…

Emtek EMT-701 Digital Installation Tester (Multifunction: Insulation, Continuity, Loop/PSC, RCD, Voltage), Calibration Certificate, Charger and Carry Bag

Surplus — As Removed Limited Stock CE marked. RCM / C-Tick (Australian) mark N180 on the rear label.
Pricing
Price on Request
Confirmed quote — including freight & certification docs — within one business day.
1-day response Worldwide shipping No obligation
Model EMT-701
Part Number EMT-701
SKU INTSMA00065
Condition Surplus — As Removed
Stock Qty 1
Hazardous Area Standard
Certifications CE marked. RCM / C-Tick (Australian) mark N180 on the rear label.
Origin Korea
Category Test, Measurement & Inspection Equipment

Description

Emtek EMT-701

is a portable multifunction tester for electricians and inspectors. It checks the safety of a fixed electrical installation: insulation resistance, earth continuity, loop impedance and prospective short-circuit current, RCD (earth leakage) trip time and current, and AC / DC voltage. It runs on eight AA cells.
  • Digital installation tester EMT-701, serial 993130001 (marked DIT06 on the lid label), built by Summit Company Limited, Korea (label: “Made in Korea”).
  • Large LCD with a rotary range switch, power slide switch, PRESS TO TEST button (press and turn to lock for continuous testing), phase 0° / 180° switch and RCD factor switch (x1/2, x1, x5).
  • Ranges marked on the panel: AC voltage 200 / 600 V, DC voltage 200 / 1000 V, insulation 250 V / 20 MΩ, 500 V / 200 MΩ and 1000 V / 2000 MΩ, continuity 20 Ω / 200 Ω, loop 20 Ω (PSC) / 200 Ω / 2000 Ω at 230 V 50/60 Hz, and RCD 10 / 30 / 100 / 300 / 500 mA.
  • Safety rating on the panel: CAT III 600 V and CAT II 1000 V. Fuses: F 0.5 A / 600 V and T 6.3 A / 250 V.
  • The lid carries a terminal application guide that also names the MFT5010 and 4010 models.
  • Supplied with a 3-pin plug-in test adaptor (T1, T2, T3 sockets, one red and two black), one crocodile clip and a plastic-sleeved protective cover.
  • Includes an MSA mains charger / power unit (EGSTON L2xFSW, in 100–250 V 50/60 Hz, out 3.6 V 1.5 A) with an Australian 3-pin IEC mains lead. This is an accessory from an MSA product, so it may not be the original charger for the tester. The tester itself takes eight AA batteries.
  • Original Certificate of Calibration No. 30281, from Electrical Measurements (Kallaroo, WA), calibration date 16/02/2012, 12-month interval. The certificate states all ranges met the manufacturer’s specification, using a Fluke 5500A reference calibrator.
  • Padded black carry bag with shoulder strap and dividers.
  • Sold as surplus, as-is where-is.
Condition Statement

Used surplus tester in its carry bag. The case has general wear and dust, and the metal lid latch is spotted with rust. The LCD is blank in the photos. The calibration sticker and certificate are dated 2012, so the calibration expired in February 2013 and the tester will need recalibration before use. Not powered up or tested by Sunrise Marine.

All brand names, model numbers, and trademarks are the property of their respective owners. Sunrise Marine is an independent supplier of surplus industrial equipment and is not an authorised distributor or representative of any OEM unless explicitly stated.

Related Items